Hardware stamping is a product we often use, it is through the mold and press pressure, in the die cavity of the metal material cutting, bending, stamping, shaping and other processing and become, then in the end in the production of hardware stamping parts should take what precautions?

 First, preventive measures in the production of hardware stamping parts

1、Regularly check the punch turntable and the mold mounting base of the stamping parts to ensure the coaxial accuracy of the upper and lower turntables.

2, hardware stamping parts in the installation and application before the need for strict inspection, dirt should be removed, stamping parts guide sets and die casting molds should be carefully checked is not well lubricated.

3, in order to ensure the service life of the tensile and compression parts, the spring of the mold should also be regularly replaced, in order to prevent the fatigue damage of the spring affects the use of the tensile stamping parts.

4, when installing the mold, stamping personnel should use soft metal manufacturing tools to prevent the stamping parts in the installation process by impact and extrusion and damage.

5, stamping parts of the convex and concave die edge wear should be stopped in time, timely grinding, otherwise it will rapidly expand the die edge wear, accelerate the wear of the mold, reduce the stamping quality and die life.

Second, stamping processing plant needs to prevent the main measures of hardware stamping scrap

1, stamping raw materials must be consistent with the specified technical conditions (strictly check the specifications and grades of raw materials, under the condition of high dimensional accuracy and surface quality requirements of the workpiece for laboratory inspection.

2, for the stamping process regulations stipulated in the various aspects of the process should be comprehensive and strict compliance;

3、The presses and stamping dies and other work equipment used should be guaranteed to work under normal working condition;

4, the production process to establish a strict inspection system, the first piece of stamping parts must be fully inspected, and only after passing the inspection can be put into production, and at the same time to strengthen the inspection, when an accident occurs to deal with it in a timely manner;

5, adhere to the civilized production system, such as stamping workpieces and billet transmission must use the appropriate workstation apparatus, otherwise it will crush and abrasion of the surface of the workpiece affects the surface quality of the stamped parts;

6, in the stamping process to ensure that the mold cavity clean, the workplace should be organized in an orderly manner after processing the workpiece should be placed neatly.

Last Article：Die Casting Design Process and Improvement

Next Article：No More